Bizfon 4000 - Manual (Page 36)

Bizfon Manual I: Installation Guide Appendix: Changing the Admin Password
Appendix: Changing the Admin Password
For security reasons, it is recommended that you change the default admin password. The
username of the administrator (admin) cannot be changed.
To change the administrator password, go to the System menu, User Rights Manage-
ment.
Fig. I-29: User Right Management page
Choose admin from the list and press the Change Password functional button from the
User Right Management page toolbar.
The Change Password page will be displayed.
Fig. I-30: Change Password page
Enter the Old Password (19) and the New Password in both the New Password and
Confirm New Password fields. Please note that only numeric digits may be entered here.
Leave Store password in persistent area (Factory reset save) disabled.
Write down the password somewhere and keep it in a secure place. If the password is lost,
a factory reset will be required on the unit (see Administrator's Guide, Hardware Overview).
All settings are lost after a factory reset. After a factory reset the default password (19) will
be restored.
Bizfon2000 and Bizfon4000 (SW Version 3.1.x) 36