Bizfon 4000 - Manual (Page 19)

Bizfon Manual I: Installation Guide Step 2.2: System Configuration Wizard
The Bizfon obtains the correct time automatically over the Internet from a time server. If you
are not located in the US/Central standard time zone, you will need to change the Time-
zone to your region.
Click on Next to display the Emergency and PSTN Access Code Settings page.
Emergency and PSTN Access Code Settings
Fig. I-14: Emergency and PSTN Access Code Settings page
You may enter your local specific emergency codes into the appropriate field. For example,
in the United States the emergency number is 911, whereas in Germany it is 112,110. In
case of an emergency you can then pick up any FXS phone and dial your configured
emergency code without any prefixes for PSTN calls (see
Step 3: Making/Receiving Calls ).
The PSTN Access Code is the prefix number you choose to dial to tell the Bizfon to “make
this call over PSTN” (see
Step 3: Making/Receiving Calls ). Users in the United States will
usually choose 9 here. European users usually would want to enter zero (0). If you do not
enter anything into this field the currently configured PSTN Access Code will stay un-
changed.
Click on Next to display the Summary Page.
Bizfon2000 and Bizfon4000 (SW Version 3.1.x) 19