Bizfon 4000 - Manual (Page 29)

Bizfon Manual I: Installation Guide Step 2.3 Internet Configuration Wizard
Step 2-A: Using IP Lines
The basic configuration procedure for Bizfon IP PBXs that use IP lines is exactly the same
as described in Step 2.
Before starting the IP Lines specific configuration, the appropriate IP Phone (the list of SIP
phones supported by Bizfon is presented below) should be connected to the LAN port of
the Bizfon.
Each IP line should be configured individually from the Telephony menu, Line Settings
page, IP Line Settings tab.
Fig. I-26: Line Settings page
Click on the IP Line number to enter the IP Lines Settings page.
Fig. I-27: IP Line Settings – Edit IP Line page
Select the SIP Phone radio button. Select the SIP IP phone model from the Phone Model
drop down list.
Bizfon2000 and Bizfon4000 (SW Version 3.1.x) 29