Wan interface configuration, Dns settings – Bizfon 4000 User Manual
Page 26
Bizfon Manual I: Installation Guide
Step 2.3 Internet Configuration Wizard
WAN Interface Configuration
If your ISP requires a specific MAC address, (for example, for authentication), it can be en-
tered on this page. The required MAC address can be entered into the User defined field.
If a specific MAC address is not required, leave the default selection This device selected.
Fig. I-22: WAN Interface Configuration page
Use the MTU drop down list to select the maximum packet size on the Ethernet (in bytes).
Click Next to display the DNS Settings page.
DNS Settings
For DNS, the selection is set to Dynamically by Provider. When using a static IP address,
fixed values must be entered.
Fig. I-23: DNS Settings page
The Bizfon will suggest the correct settings. If Dynamically by Provider is selected, the
DNS server settings will be set automatically whenever a connection to the Internet is es-
tablished.
Bizfon2000 and Bizfon4000 (SW Version 3.1.x)
26