Pioneer AVIC-F550BT - Manual (Page 110)

Black plate (110,1)
Adjusting the picture
You can adjust the picture for each source and
rear view camera.
Setting the brightness quickly
You can adjust the brightness quickly.
1 Press MODE button for about two sec-
onds.
The brightness control screen appears.
2 Tap or to adjust the brightness
level.
Adjusting the video picture
CAUTION
For safety reasons, you cannot use some of these
navigation functions while your vehicle is in mo-
tion. To enable these functions, you must stop in
a safe place and apply the handbrake (refer to
Handbrake interlock on page 18).
You can set the picture quality of the video
playback screen.
p This function can be used only on the video
playback screen of each of the following AV
sources.
! iPod
! USB
! Disc
! Rear view camera
1 Press and hold the MODE button.
The picture adjustment screen appears.
2 Touch or to adjust the desired
item.
! Brightness:
Adjusts the black intensity.
! Contrast:
Adjusts the contrast.
! Saturation:
Adjusts the colour saturation.
p The adjustments of “Brightness” and
“Contrast” are stored separately when your
vehicle
’s headlights are off (daytime) and
when your vehicle
’s headlights are on
(nighttime). These are switched automati-
cally depending on whether the vehicle
’s
headlights are on or off.
p The picture adjustment may not be avail-
able with some rear view cameras.
p Because of the LCD screen characteristics,
you may be unable to adjust the screen at
low temperatures.
Using the rear view camera
functions
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC6). (For de-
tails, consult your dealer.)
Rear view camera
The navigation system features a function that
automatically switches to the full-screen
image of the rear view camera installed on
your vehicle. When the gearstick is in the RE-
VERSE (R) position, the screen automatically
switches to full-screen rear view camera
image.
Camera for Rear view mode
Rear view camera image can be displayed all
the time so that an attached trailer, etc. can be
monitored.
= For details, refer to Setting for rear view
camera on page 110.
Setting for rear view camera
CAUTION
Pioneer recommends the use of a camera which
outputs mirror reversed images, otherwise the
screen image may appear reversed.
p Immediately verify whether the display
changes to a rear view camera image when
the gearstick is moved to REVERSE (R)
from another position.
<127075004783>110
Engb
110
Chapter
28 Other functions