Using news programme, Interruption, Receiving traffic announcements 79 – Pioneer AVIC-F550BT User Manual
Page 79: Tuning in strong frequencies 79, Limiting stations to regional, Programming, Tuning into alternative frequencies 79, Setting the fm tuning step 79, Using the radio, Using news programme interruption
Black plate (79,1)
Using news programme
interruption
You can select to enable or disable the News
function.
If the navigation system receives a news pro-
gramme broadcasted by a PTY code news sta-
tion while the News function is enabled, the
system will switch to the received programme.
% Tap [News].
Each tap of [
News] turns it on or off.
Receiving traffic announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an-
other enhanced network
’s TP station (a station
carrying information that cross-references TP
stations).
1
Tune into a TP station or another en-
hanced network
’s TP station.
2
Tap [TA].
Each tap of [
TA] turns it on or off.
p Only TP stations and other enhanced net-
works
’ TP stations are tuned in during seek
tuning or BSM when the TA function is on.
Tuning in strong frequencies
p This function can only be used on the FM
band.
Local seek tuning allows you to only tune into
those radio stations with sufficiently strong
signals for good reception.
% Tap [Local].
Each tap of [
Local] turns it on or off.
Limiting stations to regional
programming
When AF (alternative frequency) is used to
automatically retune frequencies, the regional
function limits the selection to stations broad-
casting regional programmes.
1
Display the
“System” screen.
= For details, refer to Displaying the screen for
2
Tap [Regional].
3
Tap the item you want to set.
! On (default):
Turns the
Regional function on.
! Off:
Turns the
Regional function off.
Tuning into alternative frequencies
You can select to enable or disable the AF (Al-
ternative frequency) function.
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, this product will automatically search
for a different station in the same network that
is broadcasting a stronger signal.
1
Display the
“System” screen.
= For details, refer to Displaying the screen for
2
Tap [AF].
3
Tap the item you want to set.
! On (default):
Turns the
AF function on.
! Off:
Turns the
AF function off.
Setting the FM tuning step
You can toggle FM tuning steps between
50 kHz and 100 kHz.
1
Display the
“System” screen.
= For details, refer to Displaying the screen for
2
Tap [FM Step].
3
Tap the item you want to set.
! 100K (default):
The FM tuning step is switched to 100 kHz.
! 50K:
The FM tuning step is switched to 50 kHz.
<127075004783>79
Engb
79
Chapter
19
Using
the
radio
Using the radio