Pioneer AVIC-F550BT - Manual (Page 59)

Black plate (59,1)
Setting a new starting position
for the route
For normal navigation, all routes are planned
from the current position. In order to check fu-
ture routes, simulate them or see their length
in time and distance, you can turn off the GPS
receiver. Then you can set the starting point of
the route to a different location than the cur-
rent GPS position.
1 Touch [Menu] on the map screen.
The “Navigation Menu” screen appears.
= For details of the operations, refer to Screen
switching overview on page 29.
2 Touch [My Route] on the
“Navigation
Menu
” screen.
3 Touch [Edit Route] when you already
have a route.
4 Touch on the first line (normally the
current GPS position) and confirm your ac-
tion on the warning message screen.
5 Touch [Set Start Point].
6 Select the start point of the route the
same way as you select a destination.
7 Touch [Set Start].
8 Select [Go] when the new start point is
set.
The map screen returns with a transparent
arrow mark (showing that there is no GPS re-
ception). If the current route already existed, it
is now recalculated starting from the selected
location.
# Touch [Turn on GPS].
Normal navigation returns.
= For details, refer to Seeing the current posi-
tion on the map on page 35.
<127075004783>59
Engb
59
Chapter
13
Checking
and
modifying
the
curre
nt
route
Checking and modifying the current route