Pioneer AVIC-F550BT - Manual (Page 67)

Black plate (67,1)
If your devices feature Bluetooth ® technology,
this navigation system can be connected to
your devices wirelessly. This section describes
how to set up a Bluetooth connection.
For details about the connectivity with the de-
vices featuring Bluetooth wireless technology,
refer to the information on our website.
Preparing communication
devices
This navigation system has a built-in function
to use devices featuring Bluetooth wireless
technology.
= For details, refer to Notes for hands-free
phoning on page 73.
You can register and use devices that feature
the following profiles with this navigation sys-
tem.
! HFP (Hands-Free Profile)
! A2DP (Advanced Audio Distribution Pro-
file)
p If the registered device features both HFP
and A2DP, the hands-free connection is
made and then the Bluetooth audio con-
nection is made.
If the registered device features either pro-
file, the corresponding connection is made.
p When this product is turned off, the
Bluetooth connection is also disconnected.
When the system restarts, the system auto-
matically attempts to reconnect the pre-
viously-connected device. Even when the
connection is severed for some reason, the
system automatically reconnects the speci-
fied device (except when the connection is
severed due to device operation).
Registering and connecting
your Bluetooth devices
p For details on your Bluetooth device operat-
ing procedures, refer to the instruction
manual of your device.
p Before registration, make sure that the
“Bluetooth” of setting item is set to “On”.
p Up to three Bluetooth devices can be
paired with this product.
% Use the Bluetooth setting in the
Bluetooth device to pair this product with
your Bluetooth device.
After completing pairing, Bluetooth connec-
tion starts.
p The device name is “AVIC-F550BT”.
p The default password (PIN code) is “0000”.
Connecting a registered
Bluetooth device manually
The navigation system automatically connects
the Bluetooth device selected as the target of
connection. However, connect the Bluetooth
device manually in the following cases:
! Two or more Bluetooth devices are regis-
tered, and you want to manually select the
device to be used.
! You want to reconnect a disconnected
Bluetooth device.
! Connection cannot be established automa-
tically for some reason.
If you start connection manually, carry out the
following procedure. You can also connect the
Bluetooth device by having the navigation sys-
tem detect it automatically.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific-action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Tap [Connection List].
The connection list appears.
<127075004783>67
Engb
67
Chapter
16
Registering
and
connecting
a
Bluetooth
device
Registering and connecting a Bluetooth device