Changing the view angle of the, Switching the map between 2d and, Switching the map be – Pioneer AVIC-F550BT User Manual
Page 39: How to use the map, Changing the view angle of the map, Switching the map between 2d and 3d
Black plate (39,1)
p The map orientation is fixed at “Heading
up
” when the 3D map screen is displayed.
1
Display the map screen.
= For details of the operations, refer to Screen
switching overview on page 29.
2
Touch anywhere on the map during na-
vigation.
The map stops following the current position
and control keys appear.
3
Touch
to switch the map orientation.
Each time you touch the key the setting
changes.
4
Touch [Back] to move the map back to
follow the current GPS position.
Changing the view angle of the
map
You can change the view angle of the map hor-
izontally or vertically.
p You can change the vertical view angle of
the map in 3D mode only.
= For details, refer to Switching the map be-
1
Display the map screen.
= For details of the operations, refer to Screen
switching overview on page 29.
2
Touch anywhere on the map during na-
vigation.
The map stops following the current position
and control keys appear.
3
Touch
/
to tilt up/down or
/
to
rotate left/right.
p Touching the key once modifies the view in
large steps and touching and holding the
key modifies it continuously and smoothly.
4
Touch [Back] to move the map back to
follow the current GPS position.
Switching the map between 2D
and 3D
1
Display the map screen.
= For details of the operations, refer to Screen
switching overview on page 29.
2
Touch anywhere on the map during na-
vigation.
The map stops following the current position
and control keys appear.
3
Touch
or
to switch between 2D
and 3D view modes.
Each time you touch the key the setting
changes.
p When the 2D map screen is selected,
is
displayed.
p When the 3D map screen is selected,
is
displayed.
4
Touch [Back] to move the map back to
follow the current GPS position.
<127075004783>39
Engb
39
Chapter
10
How
to
use
the
map
How to use the map