Banner American Products Wireless Network - Manual (Page 15)

15
Environmental Temperature and Humidity Monitoring
SureCross™ Wireless Nodes equipped with FlexPower™ and a
thermocouple or RTD can be easily implemented for monitoring
optimal barn temperature ranges or dairy bulk tank temperatures,
triggering a setpoint alarm if the acceptable range is exceeded.
Specialized Nodes can accommodate temperature and humidity
sensors for monitoring and alarm output on one device.
Air Flow/Ventilation Monitoring
The ventilation system is monitored with a flow meter attached
to a Flex Node. An alarm is sent if the system fails, enabling the
staff to take action in the case of a lightning strike or other
unpredictable events that can lead to the loss of livestock.
Ethanol Plant Water Monitoring
Ethanol processing facilities can
use millions of gallons of water
per day. SureCross Wireless
Nodes equipped with FlexPower
and pressure sensors can precisely
monitor critical water holding tank levels, sending
data to a SureCross Gateway and Banner EZ-LIGHT™
status indicator in a remote control center location.
Municipal Water Monitoring
Monitoring multiple data points including fill level, pH,
conductivity and flow—often from varied locations in a large
water treatment plant—can be a challenge. With four analog
inputs, a single SureCross Node can easily centralize and
transmit critical monitoring information.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com