Banner American Products Wireless Network User Manual

Page 5

Advertising
background image

5

900

MHz

2.4

GHz

SureCross offers easy, reliable
communication between
disparate products and
processes in a single scalable
and unified platform.

• Access hard-to-reach

locations; install where
wiring and conduit are not
practical

• Accommodates digital and

analog I/O in a single unit

• Integrates with existing

process or control networks

• Easy to retrofit, expand and

relocate as needed

• 900 MHz and 2.4 GHz

models accommodate
worldwide communication
standards

• Reliable and secure

Frequency Hopping Spread
Spectrum (FHSS) protocol

• Bidirectional Rx/Tx

communications between
Gateway and Nodes

• Mobile, scalable and flexible

• Easy plug-and-play

deployment

• Rugged IP67/NEMA 6 design

FlexPower™ supply options

including battery and solar

Easy to Apply Wireless Modules Go Where Other Systems Can’t.

The Banner SureCross Wireless System is a radio device network with integrated I/O

that can operate in extreme environments while eliminating the need for costly wiring
runs. The most basic SureCross network includes a Gateway system controller and one or
more Nodes that monitor and/or control I/O in remote locations. Nodes are easily deployed
throughout a facility, for gathering data to be concentrated at the Gateway. Installation is
fast and easy with flexible mounting and power options. Nodes can be either line-powered
(10 to 30V dc) or FlexPowered with multi-year battery life providing power for communications
and to external sensors.

The Gateway can act as a master device in a star topology autonomously controlling

input to output mapping, or a Modbus Slave in a host control system using RS-485 Modbus
RTU. To relay mapped I/O longer distances, a Gateway can be positioned between two
Nodes to increase transmission range of the network.

SureCross is distinctly superior to conventional wireless networks, facilitating sensing

and actuation on the same network. Not to mention its ability to transmit the status of
each I/O point and continuously monitor the health of each Node’s operational status and
signal integrity.

NODE

13

NODE

12

FlexPower

MODULE

SENSORS

SENSORS

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Advertising