Banner American Products Wireless Network User Manual
Page 31
©2007 Banner Engineering Corp. • 9714 Tenth Avenue North • Minneapolis, MN 55441 USA
763.544.3164 • Fax 763.544.3213 • Toll Free 1.888.3.SENSOR (1.888.373.6767) • www.bannerengineering.com/training
4
3
Supplemental Information
SureCross™ DX80 Wireless Devices - Changing IP Address in Windows NT
Overview: To use Ethernet communication with the DX80 Gateway Pro, configure the IP address of your computer.
Procedure: To change the IP address of a Windows NT computer, do the following:
Typical IP Address:
192.168.0.2
Default IP Address:
192.168.0.1
1
2
• Click Start > Settings > Control Panel
• Write down the existing address of your PC before changing it:
• Choose Specifiy an IP Address
• Change the IP Address to 192.168.0.2
• Change the Subnet Mask to 255.255.255.0
• Click OK
.
.
.
• Click the Protocols tab > TCP/IP Protocol > Properties
• Double-click the Network icon
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com