Pioneer SBX-N700 - Manual (Page 24)

Connecting 24
En
C
onnec
ting
2
WPS setup (Wi-Fi Protected Setup)
WPS connection setting
WPS is abbreviation of Wi-Fi Protected Setup.
A standard established by the Wi-Fi Alliance
industry group for a function allowing settings
related to interconnection of WPS compatible
wireless LAN devices and encryption to be
made with simple operations.
This unit supports push-button configuration
and PIN code configuration.
PBC (Push Button Configuration)
Connection settings are made automatically
simply by pressing the WPS buttons on the
WPS compatible wireless LAN device. This is
the simplest way of making the settings, and
is possible when the WPS compatible wireless
LAN device is equipped with WPS button.
PIN Input
Connection settings are made by inputting the
8-digit PIN code shown on the main display to
the access point to which you selected. Follow
the instructions shown in Connecting using
PIN code configuration on the right.
When performing wireless settings set [Initial
Setup]
d [Network] d [Interface] to [Wireless].
1. Press SETUP.
The Initial Setup screen is displayed.
2. Select [Network] d [Wireless Setting]
d [Next Screen] and press ENTER.
A confirmation screen is displayed.
3. Use c/d to select [Yes], then press
ENTER.
The Wireless Setting screen is displayed.
4. Use /b to select [Auto], then press
ENTER.
The WPS (Wi-Fi Protected Setup) screen is
displayed.
5. Use /b to switch between [ PBC] or
[ PIN] screens.
When connecting using PBC go to step 6.
When connecting using PIN go to step 7.
6. When connecting using PBC (Push
Button), on the [ PBC] screen use c/d
to select NEXT, then press ENTER.
Then press the WPS button on the access
point within 120 seconds. If it connects
success, it will display connection success
and IP is obtained. Go to step 9.
7. When connecting using PIN confirm
the PIN Code on the [ PIN] screen. Use
cursor c/d to select [NEXT], then press
ENTER.
8. Enter into the access point the PIN
Code that you confirmed in step 7
above.
The PIN Code input method differs
depending on the LAN device used. For
details, consult the operating instructions
accompanying your LAN device. If it
connects success, it will display connection
success and IP is obtained. Go to step 9.
9. Pressing ENTER ends [Wireless
Setting].
72-MCS838-EU0B2_En.indd 24 2013/09/05 11:56:59