Pioneer SBX-N700 - Manual (Page 38)

Basic operations 38
En
Basic oper
ations
3
Powering on the unit
with the Bluetooth
device
If you set Bluetooth Standby Mode to On, you
can connect from a paired Bluetooth device
when the unit is in standby mode.
When the connection is complete, the unit will
power on automatically and enter the state for
listening to the music on the Bluetooth device.
How to turn on Bluetooth
Standby Mode
1. Press SETUP.
The SETUP screen is displayed.
2. Set [Bluetooth] d [Bluetooth Standby
Mode] to [On].
Listening to Sound
Played by the Unit with
a Bluetooth Receiver (BT
Transmitter)
You can listen to the sound played by the
unit with a Bluetooth receiver (speakers or
headphones).
Bluetooth devices: Bluetooth speaker
Bluetooth devices: Bluetooth headphone
Devices without Bluetooth function: Speaker
+ Bluetooth audio receiver (commercially
available)
The Bluetooth wireless technology enabled
device must support A2DP profiles.
Pairing the unit and the
Bluetooth device (initial
registration)
When connecting with a Bluetooth receiver,
register the device by pairing. The pairing
information of only one device can be
registered. If you want to connect with another
device, register by pairing again.
1. Press SETUP.
The Initial Setup screen is displayed.
2. Set [Bluetooth] d [BT Transmitter] to
[On].
BT TRANSMITTER Indicator flashes.
3. Select [Bluetooth] d [Bluetooth Device
Search] d [Next Screen].
4. Set the Bluetooth device to pairing
mode.
For how to set pairing mode, see the
operating instructions for your Bluetooth
device.
5. Select [Search] and press ENTER.
A list of the found devices is displayed.
If the search operation does not complete
after at least 1 minute, press [Cancel] and
check whether the Bluetooth device is in
pairing mode. Then perform the operation
again.
6. Select the Bluetooth device to pair and
press ENTER.
7. When the connection is completed, the
BT TRANSMITTER Indicator lights.
This completes the pairing procedure.
72-MCS838-EU0B2_En.indd 38 2013/09/05 11:57:00