Pioneer SBX-N700 - Manual (Page 37)

Basic operations 37
En
Basic oper
ations
3
Enjoying music on
Bluetooth® devices
Enjoy listening to music
wirelessly from a Bluetooth
device
• Bluetooth devices: Mobile phone
• Bluetooth devices: Digital music player
• Devices without Bluetooth function: Digital
music player + Bluetooth audio transmitter
(commercially available). The Bluetooth
wireless technology enabled device must
support A2DP profiles.
Pairing the unit and the Bluetooth device
(initial registration)
Before starting the pairing operation, check
that the Bluetooth function on the Bluetooth
device is turned on. For details, see the
operating instructions for your Bluetooth
device. Once the pairing operation is
performed, it does not need to be performed
again.
1. Press BT AUDIO.
First, “BT AUDIO” appears in the display
window of the unit and then “READY” is
displayed.
2. Perform the pairing operation on the
Bluetooth device.
When searching for the unit from the
Bluetooth device, some types of Bluetooth
devices may show a list of compatible
devices on the display of the Bluetooth
device. The unit name displayed for pairing
is SBX-N500/N700.
3. Enter the PIN code.
The PIN code that can be set for the unit is
0000, 1234, or 8888 (the default setting is
0000).
If the pairing between the unit and the
Bluetooth device is successful, “SINK”
appears in the display window of the unit.
Note
• The pairing method may vary depending on the
type of Bluetooth device.
4. Play music using your Bluetooth device
For details on the playback procedure, see
the operating instructions for your Bluetooth
device.
The following operations can be performed
using the remote control of the unit.
Button Operation
d PLAY Starts playback.
e PAUSE Pauses playback.
g STOP Stops playback.
o PREV Moves to the start of the file.
Pressing twice moves to the start
of the previous file.
p NEXT Moves to the start of the next file.
m The file rewinds while this button
is pressed.
n The file fast-forwards while this
button is pressed.
• To perform operation using the remote
control of the unit, the Bluetooth device must
support the Profile: AVRCP.
• Operations performed by Bluetooth devices
may vary for different devices.
• Remote control operation cannot be
guaranteed for all Bluetooth devices.
Note
• When a Bluetooth connection is not established,
the display window of the unit shows “READY”.
72-MCS838-EU0B2_En.indd 37 2013/09/05 11:57:00