Pioneer SBX-N700 - Manual (Page 53)

Advanced settings 53
En
A
dv
anc
ed settings
5
Press SETUP.
3. Select and set [Options] d [Update] d
[Network] d Start.
Use /b/c/d to select, then press ENTER.
4. Updating starts.
Press ENTER.
y Software updating may take a certain
period of time.
y When updating is completed, the unit
restarts automatically.
 Updating using a USB flash drive
Note
y When an update file is provided on the Pioneer
website, use your computer to download it
onto a USB flash drive. Carefully read the
instructions on downloading update files
provided on the Pioneer website.
y Store the update file in the root directory of the
USB flash drive. Do not store it within a folder.
y Do not put any files other than the update file
on the USB flash drive.
y The unit supports USB flash drive formatted
in FAT32/FAT16/NTFS. When formatting a USB
flash drive on your computer, do so with the
settings below.
– File system: FAT32
– Allocation unit size: Default allocation size
y Only store the most recent update file on the
USB flash drive.
y Do not use a USB extension cable to connect
a USB flash drive to the unit. Using a USB
extension cable may prevent the unit from
performing correctly.
1. Plug in the USB flash drive on which
the update file is stored.
2. When playback is stopped, display the
Initial Setup screen.
Press SETUP.
3. Select and set [Options] d [Update] d
[USB Storage] d Start.
Use /b/c/d to select, then press ENTER.
4. Updating starts.
Press ENTER.
y Software updating may take a certain
period of time.
y When updating is completed, the unit
restarts automatically.
Restoring all the settings to
the factory default settings
1. Check that the unit’s power is turned
on.
2. When playback is stopped, display the
Initial Setup screen.
Press SETUP.
3. Select and set [Options] d [Load
Default] d [Next Screen].
Use /b to select, then press ENTER.
4. Select and set [OK].
Use c/d to select, then press ENTER.
5. Press u STANDBY/ON to turn off the
power.
6. Press u STANDBY/ON to turn on the
power.
72-MCS838-EU0B2_En.indd 53 2013/09/05 11:57:02