Pioneer VSX-921 - Manual (Page 43)

En 43
08 Control with HDMI function
Cautions on the Control with
HDMI function
! Connect the TV directly to this receiver.
Interrupting a direct connection with other
amps or an AV converter (such as an HDMI
switch) can cause operational errors.
! Only connect components (Blu-ray Disc
player, etc.) you intend to use as a source to
the HDMI input of this receiver. Interrupting
a direct connection with other amps or an
AV converter (such as an HDMI switch) can
cause operational errors.
! When Control is set to ON, HDMI Input
in The Input Setup menu on page 24 is
automatically set to OFF.
! When the receiver’s Control is turned ON,
even if the receiver’s power is in the standby
mode, it is possible to output the audio and
video signals from a player via HDMI to
the TV without producing sound from the
receiver, but only when a Control with HDMI-
compatible component (Blu-ray Disc player,
etc.) and compatible TV are connected. In this
case, the receiver’s power turns on and the
power and HDMI indicators light.