Pioneer VSX-921 - Manual (Page 75)

En 75
13 Additional information
Symptoms Causes Remedies
Cannot detect USB keyboard. The USB keyboard is routed
through a USB hub.
This receiver is not compatible with USB
hubs. Plug the keyboard directly into the
receiver.
A PS2 keyboard is routed through
a PS2/USB connector. PS2 keyboards cannot be used with this
receiver, even if routed through a PS2/USB
connector. Use a USB keyboard.
Keyboard is not a USB HID Class
device. Some devices will not be detected. Use a
USB HID Class keyboard.
Cannot enter correct text
using the USB keyboard. Keyboard is not US-international
layout keyboard. Use a US-international layout keyboard. NB:
Some characters cannot be entered.
HOME MEDIA GALLERY
Symptoms Causes Remedies
Cannot access the network. The LAN cable is not firmly con-
nected. Firmly connect the LAN cable (page 20).
The router is not switched on. Switch on the router.
Internet security software is cur-
rently installed in the connected
component. There are cases where a component with
Internet security software installed cannot
be accessed.
The audio component on the net-
work which has been switched
off is switched on. Switch on the audio component on the
network before switching on this receiver.
Playback does not start while
“Connecting...” continues to
be displayed. The component is currently
disconnected from this receiver
or the power supply. Check whether the component is properly
connected to this receiver or the power
supply.
The PC or Internet radio is not
properly operated. The corresponding IP address is
not properly set. Switch on the built-in DHCP server function
of your router, or set up the network manu-
ally according to your network environment
(page 64).
The IP address is being automati-
cally configured. The automatic configuration process takes
time. Please wait.
Symptoms Causes Remedies
The audio files stored on
components on the network,
such as a PC, cannot be
played back. Windows Media Player 11 or
Windows Media Player 12 is not
currently installed on your PC. Install Windows Media Player 11 or
Windows Media Player 12 on your PC (page
36).
Audio files were recorded in
formats other than MP3, WAV
(LPCM only), MPEG-4 AAC, FLAC,
and WMA. Play back audio files recorded in MP3,
WAV (LPCM only), MPEG-4 AAC, FLAC, or
WMA. Note that some audio files recorded
in these formats may not be played back on
this receiver.
Audio files recorded in MPEG-4
AAC or FLAC are being played
back on Windows Media Player
11 or Windows Media Player 12. Audio files recorded in MPEG-4 AAC or
FLAC cannot be played back on Windows
Media Player 11 or Windows Media Player
12. Try using another server. Refer to the
operation manual supplied with your server.
The component connected to the
network is not properly operated. Check whether the component is affected
by special circumstances or is in the sleep
mode.
Try rebooting the component if necessary.
The component connected to
the network does not permit file
sharing. Try changing the settings for the compo-
nent connected to the network.
The folder stored on the compo-
nent connected to the network
has been deleted or damaged. Check the folder stored on the component
connected to the network.
Network connections could be
restricted due to the computer’s
network settings, security set-
tings, etc. Check the computer’s network settings,
security settings, etc.
Cannot access the com-
ponent connected to the
network. The component connected to the
network is not properly set. If the client is automatically authorized, you
need to enter the corresponding informa-
tion again. Check whether the connection
status is set to “Do not authorize”.
There are no playable audio files
on the component connected to
the network. Check the audio files stored on the compo-
nent connected to the network.