Pioneer PDP-SX5080D - Manual (Page 23)

Watching TV 06
23
En
E
n
glish Changing the volume and sound
Use the remote control or the control panel on the right-hand side
of the plasma television to adjust the volume.
Using i + / i – on the remote control unit
• Press i + to increase the volume.
• Press i – to decrease the volume.
• VOLUME +/– on the plasma television operates the same as
i + / i –.
Using e on the remote control unit
1 Press e to mute the sound.
e appears on the screen.
2 Press e again or i + to restore the sound.
Switching the broadcast audio channel
Depending on the broadcast, you can switch the audio channel.
• Press - to change the audio channel.
The table below shows the available audio channels by broadcast
audio type.
Note
• In each of the sound multiplex mode selected using the
-
button, the display changes depending on broadcasting signals
being received.
• Once the MONO mode is selected, the sound remains mono
even if the system receives a stereo broadcast. You must switch
the mode back to
 or  mode if you want to hear stereo sound
again.
• Selecting a sound multiplex mode while the input source is
“INPUT 1” to “INPUT 5” does not change the type of sound. In
this case, sound is determined by the video source.
Volume adjustment
Muting
mode mode MONO mode
I II MONO
1
AAA
NICAM STEREO
10:00
1
AAA
NICAM STEREO
10:00
1
AAA
MONO
10:00
2
BBB
NICAM I
10:00
2
BBB
NICAM II
10:00
2
BBB
MONO
10:00
3
CCC
NICAM MONO
10:00
3
CCC
NICAM MONO
10:00
3
CCC
MONO
10:00
4
DDD
STEREO
10:00
4
DDD
STEREO
10:00
4
DDD
MONO
10:00
5
EEE
DUAL I
10:00
5
EEE
DUAL II
10:00
5
EEE
MONO
10:00
6
FFF
MONO
10:00
7
GGG
STEREO
10:00
6
FFF
MONO
10:00
7
GGG
STEREO
10:00
6
FFF
MONO
10:00
7
GGG
MONO
10:00
NIC
AM Broadc
asts
A2 Broadc
asts
Digital Broadc
asts
Stereo
Bilingual
Monaural
Stereo
Bilingual
Monaural
Setting
MONO