Pioneer PDP-SX5080D - Manual (Page 43)

Enjoying DTV broadcasts 09
43
En
E
n
glish Using Software Update
This function downloads and updates the system’s software at the
specified timing.
Using Auto Update
With this function on, the plasma television checks if updated
software is available and then downloads it (as necessary). After
this, the system executes Add New Channels operation (page 39).
This series of operations are automatically executed at the specified
time.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “DTV Setup” ( / then ENTER).
4 Select “Software Update” ( / then ENTER).
5 Select “Auto Update” (default) ( /).
6 Select “On” ( /).
Note
• We recommend that you normally select “On”.
• For Auto Update to start, there must be more than one hour left
to the start of the next preset recording/watching.
• 60 seconds before the scheduled update, a message prompt
appears asking if you want to carry out Auto Update or not. Auto
Update automatically starts if “OK” is selected or no selection is
made after 50 seconds.
• While an update is in progress, no TV image is output to the
external output terminal.
• To quit an update in progress, press HOME MENU.
• You can select “DTV Setup” only when watching DTV channels.
Setting Update Time
You can set the time your plasma television performs Auto Update
each day. To use this function, set “Auto Update” to “On” first.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “DTV Setup” ( / then ENTER).
4 Select “Software Update” ( / then ENTER).
5 Select “Set Update Time” ( / then ENTER).
6 Set a time for Auto Update ( /// or 0 to 9).
Starting Manual Update
This function allows you to manually execute Software Update. If
less than one hour is left to the next scheduled Auto Update or
programmed recording/watching, Manual Update cannot be
executed.
1 Repeat steps 1 to 4 provided for Setting Update Time.
2 Select “Start Manual Update” ( / then ENTER).
Note
• For Manual Update to start, there must be more than one hour
left to the start of the next preset recording/watching.
• For Manual Update to start, there must be more than one hour
left to the start of Auto Update.
• You can select “DTV Setup” only when watching DTV channels.
Displaying technical information
Use this function to check the hardware/software version number.
1 Repeat steps 1 to 4 provided for Setting Update Time.
2 Select “Technical Information” ( / then ENTER).
Note
• You can select “DTV Setup” only when watching DTV channels.
Using MHEG application (UK only)
Some stations bring you programmes with the MHEG (Multimedia
and Hypermedia Expert Group) application encoded, letting you
experience DTV interactively.
When provided, the MHEG application will start when you press any
of the colour buttons or
m.
Note
• This function may not work properly when subtitle is activated
(see page 39).
Software Update
Set Update Time
Start Manual Update
Auto Update
Technical Information
On
Set Update Time
Time
11 32 :