Pioneer PDP-SX5080D - Manual (Page 39)

Enjoying DTV broadcasts 09
39
En
E
n
glish Viewing subtitles
When in the DTV mode, press [ to turn subtitles on and off.
Note
• When a programme is recorded with this function on, subtitles
are also recorded.
Reconfiguring the DTV channel settings
This section describes how to reconfigure the DTV channel settings
after setting up DTV channels using Auto Installation (page 26). You
can select “DTV Setup” only when watching DTV channels.
Reselecting a country
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “DTV Setup” ( / then ENTER).
4 Select “Installation” (
/ then ENTER).
• The password entry screen appears. Enter your four-digit
password using buttons 0 to 9.
5 Select “Country” ( /).
6 Select a country ( /).
Note
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 55.
• You can select “DTV Setup” only when watching DTV channels.
Replacing the existing channels
The following procedure discards the current DTV channel setups
and searches for receivable channels to redo the channel setups.
1 Repeat steps 1 to 4 provided for Reselecting a country.
2 Select “Replace Existing Channels” ( / then ENTER).
• The system first erases all channel information and then starts
channel search.
• To quit a channel search in progress, press HOME MENU.
Note
• To complete “Replace Existing Channels”, there must be more
than one hour at least left to the next preset recording or preset
Auto Update time.
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 55.
• You can select “DTV Setup” only when watching DTV channels.
Adding new channels
Use the following procedure to search and register new channels
with the current DTV channel setups saved.
1 Repeat steps 1 to 4 provided for Reselecting a country.
2 Select “Add New Channels” ( / then ENTER).
• Channel search automatically starts. If any new channel is
found, it is automatically registered on the plasma television.
• To quit a channel search in progress, press HOME MENU.
Note
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 55.
• You can select “DTV Setup” only when watching DTV channels.
Subtitles On
Installation
Country
Add New Channels
Aerial Power
Replace Existing Channels
Restore System Defaults
Signal Check
Off
Germany
Replace Existing Channels
Existing Channels 04
Channels Found
Search Information
Progress
20
30%
001
002
Found Channels
003
004
************
************
******
************
Add New Channels
Existing Channels 04
Channels Found
Search Information
Progress
20
30%
001
002
Found Channels
003
004
************
************
******
************