Pioneer PDP-SX5080D - Manual (Page 26)

Setting up 08
26
En
Chapter 8
Setting up
Setting up TV channels
This section describes how to automatically search for and set up
TV channels.
Using Auto Installation
When the plasma television is switched on for the first time after
purchase, the initial auto installation is initiated. You can
automatically set language, country and channels in successive
operations.
1 Select “Language” ( /).
2 Select a language ( /).
You can select from among 17 languages; English, German, French,
Italian, Spanish, Dutch, Swedish, Portuguese, Greek, Finnish,
Russian, Turkish, Norwegian, Danish, Czech, Polish and Ukrainian.
3 Select “Country” ( /).
4 Select the country ( /).
5 Select “Tuner Type” ( /).
6 Select a tuner type ( /).
• You can select among three options; “All”, “Digital”, and
“Analogue”.
7 Select “Aerial Power” ( /).
• Only selectable when “Digital” or “All” is selected for “Tuner
Type” in step 5. If not go to step 9.
Caution
• When the “Aerial Power” setting is on, directly connect the
aerial to the ANT input terminal at the rear of the plasma
television. Connecting any device between the aerial and
plasma television may cause damage to the device.
8 Select “On” or “Off” (default)( /).
9 Select “Start” ( / then ENTER).
Auto Installation automatically starts.
• To quit Auto Installation in progress, press RETURN.
Note
• You can start Auto Installation from the HOME MENU after
moving to another country, for example. Perform the following
steps before starting Auto Installation: Press
HOME MENU,
select “Setup” ( / then ENTER), then “Auto Installation” (/
 then ENTER). The password entry screen appears. Enter your
four-digit password using buttons
0 to 9.
• If no channel is found, check the antenna connections, and
then retry Auto Installation.
Setting up analogue TV channels
manually
Use the Manual Adjust function to set up analogue TV channels
manually.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “Analogue TV Setup” ( / then ENTER).
The password entry screen appears. Enter your four-digit password
using buttons
0 to 9. For the password, see Using a password on
page 55.
4 Select “Manual Adjust” ( / then ENTER).
5 Select “Programme Entry” ( /).
6 Select a programme number ( /).
You can select 1 through 99.
7 Select “Search” ( /).
8 Enter a frequency using buttons 0 to 9, then ENTER.
You can also press / to enter a frequency.
9 Select “System” ( /).
10 Select a sound system ( /).
You can select from among “B/G”, “D/K”, “I”, “L”, and “ L’ ”.
Auto Installation
Start
Country
Language
Tuner Type
Aerial Power
Installation
English
Austria
All
Off
Manual Adjust
Search
System
Programme Entry
Colour System
Store
Tuner NR
Child Lock
Decoder
42.75MHz
B/G
Auto
Off
View
On
Yes
1