Connect to network 04 – Pioneer XW-SMA3-W User Manual
Page 22
Connect to network
04
22
En
D: Using a Web browser on a computer
supporting wired LAN to make connecting
settings for the unit
1
Use a LAN cable to connect the unit to the
computer.
2
Connect the AC adapter, and press
standby/on button.
The
on indicator will flash blue. Wait for about 30 to 40
seconds.
3
Wait for the network indicator to change
from flashing to steadily lighted red.
This may require up to 90 seconds or so.
4
When the network indicator lights red, start
your computer's Web browser, and access the
URL noted below to make settings for this unit.
The Web Control menu will appear.
For Safari
Press Bookmark icon (
) at the upper left of the screen.
Click Bonjour list (a), and then select this unit's name
(“Friendly Name”) (b) in Bookmark.
5
From the menu on the left, select “Network
Configuration.”
If you wish to change the Friendly Name, select “Friendly
Name” from the menu and change the name before selecting
“Network Configuration.”
AUX IN
DC IN
iPod/iPhone/iPad
LAN(10/100)
AUX IN
DC IN
input
volume
standby/on
6
on
input
network
SMA
http://169.254.1.1
a
b
SMA
S1000.1000.0
XW-SMA1
XX:XX
X:X
XXX:XXX
X:X
X:X