Pioneer XW-SMA3-W - Manual (Page 23)

Connect to network 04
23
En
6 If using a wireless LAN connection, input the
router’s SSID, then select the “Security” item set
on the router.
Also, if input of a fixed IP is required, set DHCP to OFF here
and make the setting. For details, see Network Configuration
on page 27.
7 If a password is requested, input it here.
8 When settings are completed, click on
Apply.
The unit will automatically power down.
9 Disconnect the LAN cable from the unit and
confirm that the router’s power is ON.
If you intend to use the unit in a wired configuration, use a
LAN cable to connect the unit to the router.
10 Press  standby/on button.
The on indicator will flash blue. When the power is completely
on ( on indicator lights steadily blue), the network indicator
will light blue, indicating that settings are completed.
iPod/iPhone/iPad LAN(10/100)
input volume standby/on
6
on input network
blue