Pioneer VSX-D1011-S - Manual (Page 105)

Techno Tidbits & Problem-solving
EXPER
T
105
En
Specifications (multi-voltage model)
Amplifier Section
Maximum Output Power .......................... 130 W/channel
(1 kHz, THD 10.0 %, 8
Ω)
Continuous Power Output (DIN)
FRONT .......... 100 W + 100 W (DIN 1 kHz, THD 1 %, 8 Ω)
CENTER ....................... 100 W (DIN 1 kHz, THD 1 %, 8
Ω)
SURROUND ......................................... 100 W + 100 W
(DIN 1 kHz, THD 1 %, 8
Ω)
SURROUND BACK ............................... 100 W + 100 W
(DIN 1 kHz, THD 1 %, 8 Ω)
Rated Power Output ................................ 100 W + 100 W
(20 Hz – 20 kHz, 0.09 %, 8 Ω)
Input (Sensitivity/Impedance)
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
LINE, CD-R/TAPE 1, MD/TAPE 2 ............. 335 mV/47 k
Ω
Frequency Response
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, LINE,
CD-R/TAPE 1, MD/TAPE 2 ...... 5 Hz to 100,000 Hz dB
Output (Level/Impedance)
VCR 1/DVR REC, VCR 2 REC, CD-R/TAPE 1,
MD/TAPE 2 REC .................................... 335 mV/2.2 k
Ω
Tone Control
BASS ..................................................... ± 6 dB (100 Hz)
TREBLE ................................................. ± 6 dB (10 kHz)
LOUDNESS .......................... +4/+2 dB (100 Hz/10 kHz)
(at volume position -40dB)
Signal-to-Noise Ratio (IHF, short circuited, A network)
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
CD-R/TAPE 1, MD/TAPE 2, MULTI CH IN .......... 101 dB
Signal-to-Noise Ratio
[DIN (Continuous rated power output/50 mW)]
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
CD-R/TAPE 1, MD/TAPE 2 ............................... 92/65 dB
Signal-to Noise Ratio [EIA, at 1 W (1 kHz)]
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
CD-R/TAPE 1, MD/TAPE 2 .................................... 93 dB
VIDEO Section (S jack)
Input (Sensitivity/Impedance)
VCR 1/DVR, VCR 2, VIDEO, DVD/LD, TV/SAT
Luminance signal (Y) ............................... 1 Vp-p/75 Ω
Chrominance signal (C) ..................... 0.286 Vp-p/75
Ω
Output (Level/Impedance)
VCR 1/DVR, VCR 2, MONITOR OUT
Luminance signal (Y) ............................... 1 Vp-p/75 Ω
Chrominance signal (C) ..................... 0.286 Vp-p/75
Ω
Frequency Response
VCR 1/DVR, VCR 2, VIDEO, DVD/LD, TV/SAT
Luminance signal (Y) ................ 5 Hz to 10 MHz dB
Signal-to-Noise Ratio
Luminance signal (Y) ........................................ 65 dB
VIDEO Section (Composite)
Input (Sensitivity/Impedance)
VCR 1/DVR, VCR 2, VIDEO, DVD/LD,
TV/SAT ......................................................... 1 Vp-p/75
Ω
Output (Level/Impedance)
VCR 1/DVR, VCR 2, MONITOR OUT,
MONITOR OUT2 ......................................... 1 Vp-p/75
Ω
Frequency Response
VCR 1/DVR, VCR 2, TV/SAT, DVD/LD
VIDEO
=MONITOR OUT, ............. 5 Hz to 10 MHz dB
Signal-to-Noise Ratio ................................................ 65 dB
FM Tuner Section
Frequency Range ........................... 87.5 MHz to 108 MHz
Usable Sensitivity .............. Mono:13.2 dBf, IHF (1.3 µV/ 75
Ω)
50 dB Quieting Sensitivity ......................... Mono: 20.2 dBf
............................................................ Stereo: 38.6 dBf
Signal-to-Noise Ratio ................... Mono: 73 dB (at 85 dBf)
............................................... Stereo: 70 dB (at 85 dBf)
Distortion ........................................ Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity ................... 60 dB (400 kHz)
Stereo Separation ........................................ 40 dB (1 kHz)
Frequency Response ................. 30 Hz to 15 kHz (± 1 dB)
Antenna Input ......................................... 75
Ω unbalanced
AM Tuner Section
Frequency Range ............ 531 kHz to 1,602 kHz (9 kHz step)
.................................... 530 kHz to 1,700 kHz (10 kHz step)
Sensitivity (IHF, Loop antenna) ........................... 350 µV/m
Selectivity ................................................................. 25 dB
Signal-to-Noise Ratio ................................................ 50 dB
Antenna ........................................................ Loop antenna
Miscellaneous
Power Requirements
............................ AC 110/120-127/220/230-240 V, 50/60 Hz
Power Consumption ............................................... 600 W
Power Consumption in Standby mode .................... 0.9 W
Dimensions .................... 420 (W)
× 188 (H) × 464 (D) mm
Weight (without package) ...................................... 18.2 kg
Furnished Parts
FM Wire Antenna ............................................................. 1
AM Loop Antenna ........................................................... 1
“AA” IEC LR6 batteries .................................................. 2
Remote Control Unit ........................................................ 1
AC Power Cord ............................................................... 2
Operating Instructions .................................................... 1
NOTE:
Specifications and the design are subject to possible
modifications without notice, due to improvements.
+0
–3
+0
–3
+0
–3