Operating range of remote control unit, Installing the receiver, Opening the front panel – Pioneer VSX-D1011-S User Manual
Page 8: Installing the receiver opening the front panel
8
En
Before You Start
Installing the Receiver
Opening the Front Panel
To open the front panel push gently on the lower third of the
panel with your finger.
Operating range of remote control unit
The area in which you can use the remote control to operate the VSX-D1011 is fairly large. To use, point the
remote control toward the remote sensor on the front panel of this unit while within the range shown below.
Remote control may not function properly if:
• There are obstacles between the remote control and the
remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver located near a device emitting infrared rays.
• Operated simultaneously with another remote control
which uses infrared rays.
CAUTION!
• Do not cover this unit in any way, for exam-
ple with a sheet or piece of cloth. This would
prevent proper heat dispersal.
• Do not any place object directly on top of this
unit. This also would prevent proper heat
dispersal.
30
30
7m