Pioneer VSX-D1011-S - Manual (Page 85)

EXPER
T
Fine Tuning Your System
85
En
Follow steps 1-5 on page 82, if necessary, to get
to the starting point mentioned here.
1 FINE CH DELAY should be
selected, if it isn’t use the
5∞
buttons to select and press
ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
2 Use the
5∞ buttons to adjust
the distance of the FRONT L
channel. Press ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
Test tones will be output.
This channel will be the target distance which
you use to measure the other channels.
CHANNEL
−
CHANNEL
+
TEXT OFF BAND
D.ACCESS RF ATT MPX CLASS
MENU TOP MENU TEXT ON TUNER EDIT
GUIDE SYSTEM
SETUP
AUDIO RETURN
ST
TUNE
MASTER
VOLUME
ST
TUNE
ENTER
1-6
3 Use the
5∞ buttons to select the
channel you want to adjust.
Press ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
Test tones will be output for the channel you
want to adjust and a reference channel.
Listen to the reference channel and use to
measure the target channel.
The adjustable channels are:
R (Front right), C (Center), LS (Surround left), RS
(Surround right), SBL (Surround back left), SBR
(Surround back right) and SW (Subwoofer).
4 Adjust the level of each channel
using the
5∞ buttons.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
Listen to the reference channel and use it to
measure the target channel. Stand facing the two
speakers with your arms outstretched pointing at
each speaker. Try to make the two tones sound
as if they are arriving simultaneously at a postion
slightly in front of you and between your arm
span.
The distance can be set within a range of 0.1 m
to 9.0 m in 0.1 m steps.
When you press ENTER you will automatically go
to the next channel.
STANDBY/ON
MOVIE MUSIC
MULTI JOG
ENTER
PHONES SPEAKERS
SIGNAL
SELECT SB CH
MODE HI-BIT HI-SAMPLING SET UP RETURN
TONE TONE CONTROL BASS/TREBLE
CLASS BAND STA MULTI JOG CONTROL SELECT
STANDBY
1-6
FINE CHANNEL DELAY
The following steps show you how to adjust the delay level of your speakers more finely than in the NORMAL
setup (see page 36). Adding a slight delay to some speakers is necessary to achieve proper sound depth,
separation as well as an effective surround sound effect. Do this procedure if you want to try and get even finer
surround sound.
The main difference with this setup method and the CHANNEL DELAY setup method in NORMAL setup is that
here the test tone sounds from a reference channel and you use that to measure the target speaker (that is, the
speaker whose level you want to adjust).