Pioneer VSX-D1011-S - Manual (Page 70)

Using Other Functions
70
En
memo
• What is output from the subwoofer depends on the SPEAKER SETTING and the type of source.
• Depending on the settings in SPEAKER SETTING and the MULTI CH IN SELECT, output from the
SURROUND BACK PRE OUT terminals may change.
• When using headphones the speakers are switched off.
• Please use speakers with a nominal impedance rated 8
Ω-16 Ω.
A/B Speaker Button
If you selected NORMAL SYSTEM in the SURRBACK SYSTEM setup (see page 35) your surround back
speakers will be used was part of your of main speaker systems and this button will simply switch if off or on.
If you selected SECOND ZONE in the SURRBACK SYSTEM setup (see page 35) this button will cycle through
the A (main) speaker system, the B speaker system (the surround back speakers acting as a separate second
zone), both speaker systems, and off.
1 Press the SPEAKERS button (on the
front panel) to switch speakers on/
off or cycle through the different
speaker systems if SECOND ZONE
or FRONT BI-AMP has been selected
in the SURRBACK SYSTEM setup.
PHONES SPEAKERS
SIGNAL
SELECT SB CH
MODE EON MODE CHARACTER/ SEARCH HI-BIT HI-SAMPLING
S-VIDEO VIDEO VIDEO INPUT AUDIO L R
SET UP RETURN
TONE
TONE CONTROL
BASS/TREBLE
CLASS BAND
STATION TUNING
MULTI JOG/ENTER
MULTI JOG CONTROL
SELECT
TUNER
EDIT
1
A(SP
3A):
Sound is output from speaker system A and the same signal is output from the pre out
terminals.
B(SP 3B): Sound is output from the two speakers in speaker system B (the surround back speakers).
Multichannel sources will be downmixed to these two speakers.
A&B(SP
3AB): Sound is output from speaker system A speakers and the B speakers. Also, for FRONT BI-
AMP playback.
OFF(SP
3 ): No sound is output from the speakers. Depending on the input signal and settings in
SPEAKER SETTING sound may be output from the subwoofer. The same sound is output
from the pre out terminals as when selecting speaker system A (above).