Using other functions, Recording from audio/video components, Functions that can be recorded – Pioneer VSX-D1011-S User Manual

Page 68

Advertising
background image

Using Other Functions

68

En

Recording from Audio/Video Components

The following explanations show you how make a recording from one component to another connected to this receiver.
Note that an analog recorder (such as a VCR) cannot record from a source that is connected using only a digital
connection. Likewise, a digital recorder (such as a CD-R) cannot record digitally from a component that is connected using
only analog connections. In both of these cases, make sure that the digital component also has analog connections to the
receiver, and that the SIGNAL SELECT is set to ANALOG.

When recording from one digital component to another, bear in mind that the digital signal output from this receiver
mirrors the input from the source. So if the input is, say, Dolby Digital, the output will also be Dolby Digital. Before
recording, make sure that the recorder is compatible with the source digital audio format.

See page 19 for more on analog audio connections and page 21–22 for digital audio connections.

• The receiver's volume, channel level, balance, TONE, DIGITAL NR, MIDNIGHT, LOUDNESS,

ACOUSTIC CAL EQ and surround effects have no effect on the recorded signal.

• In some cases, digital recordings have copy guard protections and making a digital copy is not pos-

sible. In this case you can only copy them in an analog manner.

• Some video recordings are copy-protected; these sources cannot be recorded.
• When recording video, the source must be connected to the receiver using the same type of video

cord (composite, or S video) as you used to connect the recorder to the receiver.

1 Select the source component. Set

SIGNAL SELECT according to the
source component's signal (ANALOG
or DIGITAL).

2 Start recording (tape deck, CD

recorder, VCR, etc.)

3 Playback the source to be recorded.

memo

Functions that can be recorded

SOURCE

MULTI CONTROL

RECEIVER

MOVIE

MUSIC

ENTER

MULTI

OPERATION

SURROUND

MODE

STEREO/

DIRECT

SYSTEM

OFF

ACOUSTIC

EQ

SB CH

MODE

INPUT

MIDNIGHT

CHANNEL

+−

CHANNEL

+

TEXT OFF

BAND

DIMMER

TONE

LOUDNESS

EFFECT/CH SEL

SIGNAL SEL

BASS/TREBLE

DISC

DNR

VIDEO SEL

SUB TITLE

REMOTE

SETUP

HI-BIT

D.ACCESS

RF ATT

MPX

TV CONTROL

CLASS

MUTE

MENU

TOP MENU

TEXT ON

TUNER EDIT

GUIDE

SYSTEM

SETUP

AUDIO

RETURN

CHANNEL

VOLUME

INPUT

SELECT

+

10

MULTI CH

INPUT

RECEIVER

ST

TUNE

MASTER

VOLUME

ST

TUNE

DVD/LD

ENTER

ENTER

VCR 2

TV / SAT

C D

VCR1/DVR

TV CONT

TUNER

RECEIVER

1

1

Advertising
This manual is related to the following products: