Pioneer VSX-D1011-S - Manual (Page 87)

EXPER
T
Fine Tuning Your System
87
En
ACOUSTIC CAL EQ
This setting is a kind of room equalizer for your speakers. This receiver let's you equalize the speakers in
accordance with the front speakers.
The front left speaker will serve as the reference tone. The front left tone and the target speaker (the one you
are trying to adjust) will sound in turns, so you can judge which needs to be louder.
Follow steps 1-5 on page 82, if necessary, to get
to the starting point mentioned here.
1 ACOUSTIC CAL. should be
selected, if it isn’t use the
5∞
buttons to select and press
ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
Test tones will be output.
WARNING: the test tones are very loud!!
Make sure there are no infants or small children
in the room and that no one who will be scared,
upset or damaged by loud noise is present. You
yourself may want to wear earplugs.
ACOUSTIC CAL EQ: All speakers (except for
the subwoofer) are set in accordance with the
settings of the FRONT speakers. You can adjust
each speaker individually to suit your taste. This
setting allows the listener to enjoy a sound
balance defined by the front speakers (the main
speakers for home theater). The front left
speaker will serve as the reference tone. The
front left tone and the target speaker (the one
you are trying to adjust) will sound in turns, so
you can judge which needs to be louder.
CHANNEL
−
CHANNEL
+
TEXT OFF BAND
D.ACCESS RF ATT MPX CLASS
MENU TOP MENU TEXT ON TUNER EDIT
GUIDE SYSTEM
SETUP
AUDIO RETURN
ST
TUNE
MASTER
VOLUME
ST
TUNE
ENTER
1-10
2 Use the
5∞ buttons to select the
channel that you want to adjust.
Press ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
The adjustable channels are:
Center, Surround L, Surround R, Surr Back
(surround back) L, Surr Back (surround back) R.
3 Use the
5∞ buttons to select the
frequency you want to adjust.
Press ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
The adjustable frequencys are:
63Hz, 125Hz, 250Hz, 4kHz, 11.3kHz.
For the speakers you set to SMALL (see pages
37–38) you won't be able to adjust the 63 Hz
setting.
4 Use the
5∞ buttons to adjust
the frequency. When you have it
at the level you want press
ENTER.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
Set the frequencies within the –6 dB to +6 dB
range in steps of 0.5 dB. If OVER appears in the
display you have set the levels too high. Reduce
them until OVER disappears.
5 The cursor automatically goes to
the next frequency. Press ENTER
and repeat steps 3 & 4 to adjust
all the frequencies.
LOUDNESS MIDNIGHT TONE DNR ATT STEREO
TUNED
RDS
Hi-BIT/
MULTI-ROOM
SAMPLING
EON
RF ATT
MONO Neo :6
DIGITAL
DTS ES EX
MPEG AAC
STEREO
PRO LOGIC
DSP
L C R LFE
AUTO
SB CH ON MOVIE
MUSIC
OFF
L S S R S
AUTO
RF
DIGITAL
dB SIGNAL
SP A B
ANALOG
STANDBY/ON
MOVIE MUSIC
MULTI JOG
ENTER
PHONES SPEAKERS
SIGNAL
SELECT SB CH
MODE HI-BIT HI-SAMPLING SET UP RETURN
TONE TONE CONTROL BASS/TREBLE
CLASS BAND STA MULTI JOG CONTROL SELECT
STANDBY
1-10