Pioneer VSX-909RDS - Manual (Page 32)

32
En
1 DIGITAL IN SELECT should be selected (if it
isn't use the
5¥∞ buttons to select it).
See “Setting Up for Surround Sound“ on page 30 if you need
more information.
Press the ENTER button.
Digital-In Select
Digital-1
Digital-2
Digital-3
Digital-4
Digital-5
AC-3 RF
[EXIT]
L
[ DVD/LD ]
[ CD ]
[ MD ]
[TV/SAT ]
[ VCR1 ]
[DVD/LD]
2 Choose a DIGITAL IN and assign it an input
function.
Use
2 or 3 to choose the input function that matches the
component hooked up to that digital terminal.
The possible choices include: DVD/LD, TV/SAT, CD, MD/TAPE1/
CD-R, VCR 1/DVR, VCR 2. You cannot assign digital inputs to
the TUNER, VIDEO, PHONO, and TAPE 2 MONITOR functions.
If you assign a function (for example DVD/LD) that was
previously assigned to a different Digital In the second Digital In
will automatically revert to an OFF setting. This is because one
function cannot be assigned twice.
3 Select EXIT and press ENTER button to
return to the SYSTEM SETUP MENU.
If you want to change a setting before proceeding simply
use the arrow buttons to go back.
• For the Digital 1-5 setting you can choose between DVD/
LD, CD, TV/SAT, MD/TAPE 1/CD-R, VCR 1/DVR and VCR 2
functions.
• For the AC-3 RF setting you can choose between DVD/LD,
TV/SAT, VCR 1/DVR and VCR 2 functions.
Remember, if you have a DVD/LD player or LD player you
should hook it up to the analog and digital jacks in addition to
the 2 RF connection described here.
Digital-In Select
In order to be able to use your digital equipment properly you need to assign digital inputs for each of the digital
components you connected. Match the Digital 1-5 settings with the digital jacks 1-5 in accordance with what is
connected to each digital jack. Check the digital jack numbers on the back of the receiver to make certain what
component is in which jack (if necessary, see page 13 for more on digital connections). The last setting, the AC-
3 RF setting, is specifically for a DVD/LD player or LD player with an 2 RF output. If you connected one of
these components match this button to the component. If continuing from the last page go to step 1. If starting
fresh, complete steps 1-3 in “Setting Up for Surround Sound“ (p.30) first.
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1-3
/DTS/MPEG
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT DSP
THX LIGHT
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TVCONT
RECEIVER
USE SETUP
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION TUNING
DISPLAY RF ATT
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
ADVANCED
MIDNIGHT MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/
CH SEL
SIGNAL
SELECT
BAND
SYSTEM
OFF
1 2 3
4 5 6
7 8 9
0
DISC
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL
+ +
– –
+
–
+10
Initial Set Up