Pioneer VSX-909RDS - Manual (Page 40)

40
En
1 Select DYNAMIC RANGE CONTROL (if
continuing from BASS PEAK LEVEL, it will
already be selected).
See “Setting Up for Surround Sound“ on page 30 if you are
unsure how to do this.
Press the ENTER button.
Dynamic Range Control
Select Mode [ OFF ]
(For Dolby Digital)
[EXIT]
• The default setting is OFF.
• If listening at loud volumes we recommend turning the
Dynamic Range Control OFF.
2 Use the
2 or 3 arrows to choose OFF, MID
or MAX.
3 Select EXIT and press ENTER button to
return to the SYSTEM SETUP MENU.
If you want to change a setting before proceeding Choose a
new DYNAMIC RANGE CONTROL setting.
You may need to experiment with different Dolby Digital
sources before you can use the DYNAMIC RANGE CONTROL
setting to suit your low volume listening needs.
Dynamic Range Control
This feature makes it possible to enjoy full surround sound effects on Dolby Digital sources even at low
volumes. It does this by compressing the dynamic range. Dynamic range is the difference between the loudest
and the softest sounds in any given signal. Compressing the range plays sounds so the quieter ones are audible
and the louder ones don’t get distorted or become overpowering. This feature only applies to Dolby Digital
sources but the MIDNIGHT LISTENING mode accomplishes the same end for a variety of sources (see page
50). If continuing from Bass Peak Level go to step 1. If starting fresh, complete steps 1-3 in “Setting Up for
Surround Sound“ (p.30) first.
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1-3
/DTS/MPEG
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT DSP
THX LIGHT
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TVCONT
RECEIVER
USE SETUP
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION TUNING
DISPLAY RF ATT
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
ADVANCED
MIDNIGHT MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/ CH SEL
SIGNAL
SELECT
BAND
SYSTEM
OFF
1 2 3
4 5 6
7 8 9
0
DISC
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL
+ +
– –
+
–
+10
Initial Set Up