Pioneer X-HM30DAB-K - Manual (Page 35)

X-HM30V_DAB_En.fm
En-35
2011August 30
MP3/WMA playback (USB Audio function) (continued)
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press the RANDOM/REPEAT button on the remote
control until “Random” appears. Press the / button.
To cancel random play:
Press the RANDOM/REPEAT button until “RDM” indicator
disappears.
Notes:
l If you press the button during random play, you
can move to the track selected next by the random
operation. On the other hand, the button does not allow
you to move to the previous track. The beginning of the
track being played will be located.
l In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
Caution:
After performing repeat play, be sure to press the
button. Otherwise, the disc will play continuously.
To cancel the programmed play mode:
During programmed stop mode, press the button. The
display will show “Memory Clear” and all the programmed
contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press the MEMORY/FOLDER
button repeatedly to go to the last programme memory.
Then follow steps 2 - 3 to add tracks. The new tracks will
be stored after the last track of the previous programme.
Notes:
l During the programme operation, random play is not
possible.
l If USB memory device is not connected, “USB No
Media” will be shown on the display.
l This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32 kHz, 44.1 kHz, 48
kHz)
l Playback order for MP3 files may differ depending on
the writing software used during file download.
l Bitrate which is supported by MP3 is 32 kbps to 320
kbps, WMA is 64 kbps to 160 kbps.
l For MP3/WMA files, please put “.MP3” “.WMA”
extension. Files cannot be played back if there is no
MP3/WMA extension.
l Playlists are not supported on this unit.
l This unit can display Folder Name or File Name up to
32 characters.
l Maximum total number of MP3/WMA files is 1024.
Maximum total number of folders is 255 inclusive of
root directory.
l Total number of folders read is 999 including folder
with non-playable file. However, the display shows only
folder with MP3 files.
l The display playback time may not be displayed
correctly when playing back a variable bitrate file.
l The ID3TAG information supported are TITLE,
ARTIST and ALBUM only. Title name, artist name and
album name can be displayed by pressing the
SUBTITLE/DIGEST/DISPLAY button during file
playback or pause mode.
l WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
n Random play
n Programmed play (MP3/WMA)
1 Whilst in the stop mode, press and hold the MEMORY/
FOLDER button to enter the programming save mode.
2 Press cursor  or  button on the remote control to
select the desired folder.
Then press the or button on the remote control
to select the desired tracks.
3 Press the MEMORY/FOLDER button to save the folder
and track number.
4 Repeat steps 2 - 3 for other folder/tracks. Up to 32
tracks can be programmed.
5 Press the / button to start playback.