Pioneer X-HM30DAB-K - Manual (Page 41)

X-HM30V_DAB_En.fm
En-41
2011August 30
Listening to the DAB+ (continued)
4 Within 30 seconds, press the MEMORY button to store
that station in memory. If the "MEMORY" and preset
number indicators dissapear before the station is
memorised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
* Frequencies are displayed to two decimal places on this unit.
Timer and sleep operation (Remote
control only)
Timer playback:
The unit turns on and plays the desired source (DISC,
Tuner, DAB, USB Audio, USB Video, iPod, Line In) at a
preset time.
This unit has 2 types of timer: ONCE TIMER and
DAILY TIMER.
Once timer:
Once timer play works for one time only at a preset time.
(“ ” indicator).
Daily timer:
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
(“DAILY” indicator).
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio
programme, and use the daily timer to wake up.
n DAB Frequency table (BAND III)
Frequency Label Frequency Label
174.928 MHz 5A 208.064 MHz 9D
176.640 MHz 5B 209.936 MHz 10A
178.352 MHz 5C 211.648 MHz 10B
180.064 MHz 5D 213.360 MHz 10C
181.936 MHz 6A 215.072 MHz 10D
183.648 MHz 6B 216.928 MHz 11A
185.360 MHz 6C 218.640 MHz 11B
187.072 MHz 6D 220.352 MHz 11C
188.928 MHz 7A 222.064 MHz 11D
190.640 MHz 7B 223.936 MHz 12A
192.352 MHz 7C 225.648 MHz 12B
194.064 MHz 7D 227.360 MHz 12C
195.936 MHz 8A 229.072 MHz 12D
197.648 MHz 8B 230.784 MHz 13A
199.360 MHz 8C 232.496 MHz 13B
201.072 MHz 8D 234.208 MHz 13C
202.928 MHz 9A 235.776 MHz 13D
204.640 MHz 9B 237.488 MHz 13E
206.352 MHz 9C 239.200 MHz 13F
MEMORY/FOLDER
+
DVD/CD
STANDBY/ON
CLOCK/TIMER
ENTER
SLEEP
PRESET PRESET
TUNER/DAB
SCAN ENTER(DAB) DISPLAY
1 Set the daily timer (page 41 - 42).
2 Set the once timer (page 41 - 42).
n Timer playback
Before setting timer:
l Check that the clock is set to the correct time (refer
to page 18). If it is not set, you cannot use the timer
function.
l For timer playback: Plug in USB or load discs or dock
iPod to be played.
1 Press the STANDBY/ON button to turn the power on.
2 Press and hold the CLOCK/TIMER button.
3 Within 30 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
4 Within 30 seconds, press the or button to select
"Timer set", and press the ENTER button.
5 To select the timer playback source (DISC, Tuner, DAB,
USB Audio, USB Video, iPod, Line In), press the
PRESET + or – button. Press the ENTER button.
When you select the tuner, select a station by pressing
the or button, and then press the ENTER
button. If a station has not been programmed, “No
Preset” will be displayed and timer setting will be
cancelled.
6 To adjust the day, press the or button and then
press the ENTER button.
7 Press the ENTER button to adjust the hour. Press the
the or button and then press the ENTER button.
8 To adjust the minutes, press the the or button
and then press the ENTER button.
9 Set the time to finish as in steps 7 and 8 above.
10Adjust the volume using the VOL + or – button, and then
press the ENTER button. Do not turn the volume up too
high.
Once timer Daily timer
Start Stop
1 minute or more
Start Stop