Basic operations – Pioneer AVG-VDP1 User Manual
Page 10
! To select the background, refer to Selecting
the background display on page 14.
! To turn the various indicators on or off,
refer to Switching the indicators on or off on
1 Horsepower (POWER)
Shows the horsepower calculated minus all
possible losses such as drivetrain, rolling re-
sistance, and aerodynamic drag. Therefore,
this horsepower value becomes lower than
engine horsepower or wheel horsepower.
2 Slope (SLOPE)
Shows the slope of your vehicle.
3 Tachometer (TACH)
Shows the engine speed in revolutions per
minute (rpm).
4 Speedometer (SPEED)
Shows your vehicle speed.
5 Acceleration (ACC.G)
Shows the acceleration in a forward direc-
tion. The + sign indicates acceleration
while the sign indicates deceleration
(braking).
6 Torque (TORQUE)
Shows the torque, the twisting force pro-
duced at the heart of the engine.
7 Voltage (BATT.)
Shows the battery voltage.
8 Angular velocity (ANG.V)
Shows the turning speed of your vehicle.
9 Longitude and latitude (LON./LAT.)
Shows the longitude and latitude of the cur-
rent location of your vehicle.
a Compass
Shows the direction your vehicle is travel-
ling.
b Lateral acceleration (LAT.G)
Shows the acceleration in the lateral direc-
tion.
c Time (TIME)
Shows the current time.
Cyber mode
1
7
3
c
6
a
8
2
4 5
b
9
9
You can turn the various indicators on or off.
(Refer to Switching the indicators on or off on
1 Distance to the destination
Shows the straight distance between the
destination and the current location.
2 Slope (SLOPE)
Shows the slope of your vehicle.
3 Direction line
Shows the direction towards the destina-
tion.
4 Destination name
Shows the name of the destination stored in
this unit.
Basic Operations
En
10
Section
03