Pioneer AVG-VDP1 - Manual (Page 14)

Introduction of appearance
settings
1
Appearance settings lets you customize the
appearance of each mode.
1 Function display
Shows the function names.
% Touch Display to display the function
names.
The function names are displayed.
# When Display is not displayed, you can dis-
play it by touching the screen.
# To cycle through all of the functions, touch
or .
# To return to the previous display, touch Back.
# To return to the normal display of each mode,
touch ESC.
Selecting the background
display
You can select the background display sepa-
rately for each mode.
! This function cannot be operated when se-
lecting the cyber mode.
1 Touch Display and then touch
Background.
2 Touch Background to select the desired
background display.
Each time you touch Background it selects
background displays in the following order:
Analog, digital and vehicle status modes
Movie1 (movie 1)Movie2 (movie 2)
Picture1 (picture 1)Picture2 (picture 2)
Picture3 (picture 3)
Virtual mode
Desert (desert)Country (country)City
(city)
Selecting the colors
You can select the color of the gauges; gauge
ring and gauge face, etc.
! These functions can be operated when se-
lecting the analog and the digital modes.
Selecting the gauge ring color
1 Touch Display and then touch
Gauge Ring.
2 Touch Gauge Ring to select the desired
color.
Each time you touch Gauge Ring it selects
colors in the following order:
Red (red)Blue (blue)Yellow (yellow)
White (white)Orange (orange)
Selecting the gauge face color
1 Touch Display and then touch
Gauge Face.
2 Touch Gauge Face to select the desired
color.
Each time you touch Gauge Face it selects
colors in the following order:
Customizing the
Appearance
En
14
Section
04