Pioneer AVG-VDP1 - Manual (Page 12)

6 Compass
Shows the direction your vehicle is travel-
ling.
7 Longitude and latitude (LON./LAT.)
Shows the longitude and latitude of the cur-
rent location of your vehicle.
8 Speedometer (SPEED)
Shows your vehicle speed.
Vehicle status mode
1 3
5
2
4
You can customize the graph and the back-
ground.
! To customize the graph, refer to Customiz-
ing the graph on page 17.
! To select the background, refer to Selecting
the background display on page 14.
1 Graph
Shows the graph of speed vs time.
2 Time (TIME)
Shows the current time.
3 Speedometer (SPEED)
Shows your vehicle speed.
4 Tachometer (TACH)
Shows the engine speed in revolutions per
minute (rpm).
5 Acceleration (ACC.G)
Shows the acceleration in a forward direc-
tion. The + sign indicates acceleration
while the  sign indicates deceleration
(braking).
Selecting gauges
You can change the combination of gauges.
! This function can be operated only when
selecting the analog mode.
1 Touch Select Gauge.
The touch panel keys for selecting the gauges
are displayed.
# When Select Gauge is not displayed, you can
display it by touching the screen.
2 Touch the middle of a gauge that you
want to change.
The cursor moves to the selected gauge.
3 Touch i or j to select the gauge type.
Each time you touch i or j selects the
gauge types in the following order:
TACH (tachometer)BATT. (voltmeter)
ACC.G (accelerometer)LAT.G (lateral ac-
celerometer)POWER (horsepower meter)
TORQUE (torque meter)tiltmeterSPEED
(speedometer)
4 Touch k or l to switch among the po-
sition of the gauges.
Basic Operations
En
12
Section
03