Pioneer AVG-VDP1 - Manual (Page 30)

Setting the clock
This function lets you adjust the time differ-
ence between the time originally set in this
unit and the current location of your vehicle.
1 Touch Menu and then touch SETUP.
2 Touch Clock Adjust.
# When Clock Adjust is not displayed, touch
until you see it displayed.
3 Touch + or  to set the time difference.
Clock can be adjusted for the time difference
by one-hour.
Setting RPM alert
If you set an RPM value for caution, this unit
beeps and displays an alert message when the
RPM of your vehicle reaches the set RPM
value.
! Alert is shown in the display when the RPM
reaches to 80%, 90% and 100% of RPM
value you have set for caution.
1 Touch Menu and then touch SETUP.
2 Touch R"P"M Alert.
# When R"P"M Alert is not displayed, touch
until you see it displayed.
3 Touch Caution to turn RPM alert on or
off.
4 Touch + or  to set the value of RPM
alert.
Setting speed alert
If you set a speed value for caution, this unit
beeps and displays an alert message when the
speed of your vehicle reaches the set speed
value.
1 Touch Menu and then touch SETUP.
2 Touch Speed Alert.
# When Speed Alert is not displayed, touch
until you see it displayed.
3 Touch Caution to turn speed alert on or
off.
4 Touch + or  to set the value of speed
alert.
Selecting the video format
You can switch the video output format of
VIDEO OUT between NTSC and PAL.
1 Touch Menu and then touch SETUP.
2 Touch Format Setting.
# When Format Setting is not displayed, touch
until you see it displayed.
3 Touch Format to switch between NTSC
(NTSC) and PAL (PAL).
When selecting PAL (PAL), the video output in
the PAL 60 format is outputted from this unit.
Please make sure that your display/VCR is
compatible with PAL 60.
Note
When using this units VIDEO OUT, display the
V.D.P. image outputted from this unit on the front
display.
Setup adjustments
En
30
Section
08