Pioneer DBR-TF100 - Manual (Page 20)

Advanced operation 05
20
• When two programmes are set so that
they overlap, the programme which
starts first has priority and will be played
in its entirety.
When two programmes have the same
start time, the programme with the
highest number in the Programme
Timer slots has priority.
If you set a timer and the time slot is
overlapping another timer setting, and
the other timer setting has priority, a
warning is displayed.
9 Repeat Steps 1–8 to set additional pro-
gramme.
10 Press MENU to complete the setting
and exit the Programme Timer menu.
Editing a timer setting (Cancel/
Modify/Move)
You can cancel/modify/move a timer setting.
1 Display the Programme Timer menu.
2 Press 5/∞ to select the timer slot to be
edited, then refer to the instruction below.
• To cancel the setting, press the RED
button. The setting is cancelled.
• To modify the setting, press SELECT.
You can modify the setting.
• To move the setting, press the BLUE
button. Press 5/∞ to move the selected
timer slot and then press the BLUE but-
ton.
• If you are watching a digital programme
when a timer is about to start, an alert
will appear on the screen about one
minute before the timer starts. To view
the timer programme, press
SELECT.
To cancel the timer programme press
2/3 to select CANCEL TIMER and
press SELECT. If you do not press any
buttons the timer will start at the pro-
grammed time.
• When a programme set by the timer is
playing, the LED turns orange.
• If any button is pressed while a timer
is active an alert will appear on the
screen. Press
EXIT to cancel the timer
and return the DTR to viewing a digital
programme or do nothing and the timer
will continue.
• When time changes because of switch-
ing into or out of summer time there
are missing and extra hours. If you set
a start time or end time for recording
during one of these hours it may not
operate as planned.
Freezing a frame
You can freeze display of a frame from a
programme.
1 While viewing a programme, Press 2.
The image freezes on screen.