Pioneer DBR-TF100 - Manual (Page 31)

Other options 08
31
En
gli
sh
Banner Timeout
When you change channels a banner show-
ing channel and programme information is
displayed for a selected amount of time or is
not displayed, according to the settings you
make here. Press
2/3 to select from No
Banner or a time of 1 to 10 seconds.
Slideshow Interval
This sets the number of seconds a snap-
shot is shown before advancing to the next
snapshot during a slideshow. Press
2/3
to change the interval between 1 and 10
seconds.
Language Settings
The sets the preferred language for various
options.
Menu Language: Selects the language used
for menu text on the screen.
Audio Language: Selects the language
broadcast in DVB-T MPEG streams.
Subtitle Language: Selects the language
for subtitles.
Teletext Language: Select the language for
Teletext.
1 Press 5/∞ to select a language setting
option; Menu, Audio, Subtitle or Teletext and
press
SELECT.
2 Press 2/3 to choose a language and
press SELECT. The selected language is set
for that option.
3 Press MENU to leave.
• You may select any language for any lan-
guage setting option but if that language
is not available it will not display nor be
audible in that language.
TV Setup
The TV Setup menu allows you to select and
set TV and video options. To set any prefer-
ence, go to the TV Setup menu as follows:
1 While viewing a programme, press
MENU. The HOME MENU is displayed.
2 Press 5/∞ to select Setup and press
SELECT. The Setup menu is displayed.
3 Press 5/∞ to select TV Setup and press
SELECT. The TV Setup menu is displayed.