Pioneer DBR-TF100 - Manual (Page 41)

Troubleshooting 10
41
Countermeasures
• Check the mains power supply
connection.
• Press one of the number
buttons or STANDBY
button
on the remote to wake up the
DTR.
• Press the remote TV/DTV
button.
• Check the SCART connec-
tions.
• Check the TV setting.
• Check all connections.
• Check the aerial connection.
Choose Add New Channels
from the Installation menu and
scan for broadcast channels.
If no channels have been added,
other menu screens do not
display.
Chapter 10:
Troubleshooting
Condition
No sound, no picture.
Only the Setup menu
displays. No functions or
menus can be accessed.
Possible cause
• The DTR is not plugged into
the main power supply.
• The DTR is in standby.
• Non-digital television is being
viewed via the VHF/UHF aerial
TV connection.
• The SCART lead is connected
to the wrong sockets.
• The connections are correct
but the TV is not switched to an
external AV source (AV1 or EXT
1, etc.).
• The connection cables might
be defective (corroded, broken,
or damaged) or missing.
• A download list of (digital)
services is not stored in the
DTR’s memory.
If you are having trouble with the DTR, check the following items to see if the problem can be
resolved. Sometimes another device is at fault, so be sure to also inspect the other devices
being used.
English