Pioneer DBR-TF100 - Manual (Page 35)

Other options 08
35
En
gli
sh
3 Press 5/∞ to select Software Update
and press SELECT. The Software Update
menu is displayed.
4 Press 5/∞ to select any of the following
four functions: Auto Update, Set Update
Time, Start Manual Update or Technical
Information and then follow the instructions
for each.
• Press MENU or EXIT to exit the menu.
• Press RETURN to return to the previous
menu.
Auto Update
Press 2/3 and choose Auto Update
On/Off. When Auto Update is on, a check
for available software updates and new
channels is accomplished daily at a time
specified in Set Update Time.
• So that you always have the latest
software and broadcasting channels, be
sure to turn Auto Update to on.
Set Update Time
Select to set the time at which the DTR will
check for updates on a daily basis. Press
5/∞ to adjust the hour and then 3 to move
to minutes. Again, press 5/∞ to adjust the
minutes and then press MENU to set and
exit the menu.
Start Manual Update
Select to start an update immediately.
Technical Information
Selecting this will display technical informa-
tion.
Quick User Guide
You can view the demonstration of the DTR.
1 While viewing a programme, press
MENU. The HOME MENU is displayed.
2 Press 5/∞ to select Setup and press
SELECT. The Setup menu is displayed.