Pioneer DBR-TF100 - Manual (Page 33)

Other options 08
33
En
gli
sh
Installation
In the Installation menu you can configure
setting for installation, scan for new chan-
nels, delete channels no longer available and
check the signal strength of each channel. To
access these go to the Installation menu as
follows:
1 While viewing a programme, press
MENU. The HOME MENU is displayed.
2 Press 5/∞ to select Setup and press
SELECT. The Setup menu is displayed.
3 Press 5/∞ to select Installation and
press SELECT. The Installation menu is
displayed.
4 Press 5/∞ to select the preference you
wish to set or the function you wish to use.
Then, refer to the instructions below.
• Press MENU or EXIT to exit the menu.
• Press RETURN to return to the previous
menu.
RF Output Channel
This selects an output channel for the RF
modulator. Press
2/3 to choose any chan-
nel from 21 to 69 or Off.
Aerial Power
If your DTR is to provide power to the aerial,
turn this option on. Press
2/3 to select On
or Off.
• Normally No is selected. Some optional
equipment aerials require power to be
supplied by the DTR. If you have such
an aerial, select
Yes. Refer to the user
manual for that product for further infor-
mation.