Pioneer CNDV-50MT - Manual (Page 110)

108
App
en
d
ix
NA
V
I/
A
V
When the installation is complete, the
opening display appears.
6
Press the NAVI/AV button to change the
navigation screen.
Some time is needed until navigation is ready.
7
Check the details of the cautionary
message and touch “OK”.
8
To set the time difference, touch “+” or
“–”.
The time difference between the time
originally set in this unit (Central European
Time) and the current location of your vehicle
is shown. If necessary, adjust the time
difference. Touching “+” or “–” changes the
time difference display in one-hour
increments. The time difference can be set
from +3 to –3 hours.
9
If necessary, set to summer time.
Summer time is off by default. Touch
“Summer Time” to change the time if
summer time is in effect. This turns the
display below Summer Time “On”.
10
To complete the setting, touch “Back”.
The map of your surroundings appears.
This completes the setup of your Navigation
System. Chapter 1 explains the basic operation of
your Navigation System.
➲ To change the time later ➞ Page 59
Time difference
MAN-CNDV-50MT-EN.book Page 108 Wednesday, May 4, 2005 1:49 PM