Pioneer CNDV-50MT - Manual (Page 53)

51
Ch
ap
te
r
4
Ed
it
in
g t
h
e N
aviga
tio
n
Ut
il
it
ies
NA
V
I
❒ When the Navigation System is reset, or
the language setting is changed, the
background picture may change back to
the original picture. (There is also a
possibility that the system will revert to the
original picture for some other reason.) If
this happens, set the background picture
again. Checking the Navigation Status
The navigation status, including the driving
status of a vehicle, positioning status by satellite,
learning status of the 3D sensor, and cable
connection status can be checked.
Checking sensor learning status
and driving status
1
Touch “Settings” in the Main menu, then
touch “Hardware Info”.
2
Touch “3D Calibration Status”.
The 3D Calibration Status screen appears.
(1) Distance
Driving distance is indicated.
(2) Speed Pulse
Total number of speed pulses is indicated.
(3) Learning Status
Current driving mode is indicated.
(4) Degree of learning
Sensor learning situations of distance
(Distance), right turn (Right Turn), left turn
(Left Turn), and 3D detection (3D Detection)
are indicated by the length of bars.
(5) Speed
Speed detected by this unit is indicated. (This
indication may be different from the actual
speed of your vehicle, so please do not use
this instead of the speedometer of your
vehicle.)
(6) Acceleration or deceleration/
Rotational speed
Acceleration or deceleration velocity of your
vehicle is indicated. Also, rotational speed
when your vehicle turns to left or right is
shown.
(7) Inclination
Degree of slope of the street is indicated.
(1)
(2)
(3)
(4)
(5) (7) (6)
MAN-CNDV-50MT-EN.book Page 51 Wednesday, May 4, 2005 1:49 PM