Pioneer CNDV-50MT - Manual (Page 55)

53
Ch
ap
te
r
4
Ed
it
in
g t
h
e N
aviga
tio
n
Ut
il
it
ies
NA
V
I
3
Touch the items you want to display.
You can select the following items.
• Voltage:
Displays the power supply and voltage
supplied from the battery to this system.
• Acceleration:
Acceleration in a forward direction is
displayed. The + sign indicates acceleration
while the – sign indicates deceleration.
• Side Acceleration:
Acceleration in a side direction such as when
turning, is displayed. The + sign indicates a
right turn, while the – sign indicates a left
turn.
• Angular Velocity:
Displays the vehicle’s turning angle over one
second (how far it has turned in a second).
• Slope:
Displays the vehicle’s vertical movement. The
+ side represents the rising angle, and the -
side the falling angle.
• Direction:
The direction your vehicle is travelling in is
displayed.
• Clock:
Current time is displayed.
• Adjust Look:
Touch “Adjust Look” to display a screen for
selecting the panel pattern. Touch one of the
patterns from among those displayed
onscreen to change the panel to the selected
pattern.
❒
If you touch “Peak Hold Reset”, the
maximum and minimum (green line)
values indicated in “Acceleration” and
“Side Acceleration” are reset.
❒ You cannot change the speedometer at the
centre.
❒ Selecting Demo mode in the Settings
menu enables you to perform a
demonstration with random values.
MAN-CNDV-50MT-EN.book Page 53 Wednesday, May 4, 2005 1:49 PM