Pioneer DEH-P9600MP - Manual (Page 24)

Playing a CD
1
2
These are the basic steps necessary to play a
CDwith your built-in CDplayer. More ad-
vanced CDoperation is explained starting on
the next page.
1 Track number indicator
Shows the track currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press EJECT.
CDloading slot appears.
# After a CDhas been inserted, press SOURCE
to select the built-in CDplayer.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CDloading slot
EJECT button
# You can eject a CDby pressing EJECT.
# If the front panel is in the eject position
(shown above), buttons other than EJECT,
VOLUME, OPEN, and ATT (on the remote con-
trol) do not operate.
3 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
4 To perform fast forward or reverse,
press and hold c or d.
# If you select Rough search, pressing and
holding c or d enables you to search every 10
tracks in the current disc. (Refer to Selecting the
search method on page 27.)
5 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! The built-in CDplayer plays one, standard, 12-
cm or 8-cm (single) CDat a time. Do not use
an adapter when playing 8-cm CDs.
! Do not insert anything other than a CD into
the CDloading slot.
! There is sometimes a delay between starting
up CDplayback and the sound being issued.
When being read in, Format read is dis-
played.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting it again.
! If the built-in CDplayer does not operate prop-
erly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page 70.
! You can eject the CDby pressing and holding
EJECT with eject position when the CDload-
ing or ejecting cannot operate properly.
Built-in CD Player
En
24
Section
06