Adjusting source levels 55, Auto ta and eq (auto-time alignment and, Auto-equalizing) – Pioneer DEH-P9600MP User Manual

Page 55: Adjusting source levels, Audio adjustments

Advertising
background image

Press AUDIO and hold until second audio

menu appears in the display, then press

AUDIO until ASL appears in the display.

2 Press a to turn ASL on.

ASL: ON appears in the display.

# To turn ASL off, press b.

3 Press c or d to select the desired ASL

level.

Each press of c or d selects ASL level in the

following order:

Low (low)Mid-Low (mid-low)Mid (mid)

Mid-High (mid-high)High (high)

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

! Settings are based on the FM tuner volume

level, which remains unchanged.

1 Compare the FM tuner volume level

with the level of the source you wish to ad-

just.

2 Press AUDIO to select SLA.

Press AUDIO until SLA appears in the display.

Press AUDIO and hold until second audio

menu appears in the display, then press

AUDIO until SLA appears in the display.

# When selecting the FM tuner as the source,
you cannot switch to SLA.

3 Press a or b to adjust the source vo-

lume.

Each press of a or b increases or decreases

the source volume.

+4  4 is displayed as the source volume is

increased or decreased.

Notes

! The MW/LW tuner volume level can also be

adjusted with source level adjustments.

! The built-in CDplayer and the multi-CDplayer

are set to the same source level adjustment
volume automatically.

! External unit 1 and external unit 2 are set to

the same source level adjustment volume
automatically.

Auto TA and EQ (auto-time

alignment and auto-

equalizing)

The auto-time alignment is automatically ad-

justed for the distance between each speaker

and the listening position.

The auto-equalizer automatically measures

the car interior acoustic characteristics, and

then creates the auto-equalizer curve based

on that information.

WARNING

To prevent accidents, never carry out auto TA and
EQ while driving. When this function measures
the car interior acoustic characteristics to create
an auto-equalizer curve, a loud measurement
tone (noise) may be outputted from the speakers.

Audio Adjustments

En

55

English

Section

09

Advertising