Initial settings, Adjusting initial settings 59, Selecting the display language 59 – Pioneer DEH-P9600MP User Manual

Page 59: Setting the clock 59, Adjusting initial settings, Selecting the display language, Setting the clock

Advertising
background image

Adjusting initial settings

1

Initial settings lets you perform initial setup of

different settings for this unit.

1 Function display

Shows the function status.

1 Press SOURCE and hold until the unit

turns off.

2 Press OPEN to open the front panel.

3 Press FUNCTION and hold until function

name appears in the display.

4 Press FUNCTION to select one of the in-

itial settings.

Press FUNCTION repeatedly to switch be-

tween the following settings:

Language select (language selection)Clock

(clock)AUX (auxiliary input)Dimmer

(dimmer)Brightness (brightness)

Digital ATT (digital attenuator)Mute (tel-

ephone muting/attenuation)

FM tuning step (FM tuning step)

Auto PI seek (auto PI seek)

Warning tone (warning tone)

Face auto open (flap auto open)

Hands free (hands-free telephoning)

SRC off standby (telephone standby)

Demonstration (feature demo)

Reverse mode (reverse mode)Ever-scroll

(ever scroll)

Use the following instructions to operate each

particular setting.

# To cancel initial settings, press BAND.

# You can also cancel initial settings by holding
down FUNCTION until the unit turns off.
# When the hands-free telephoning is
Hands free OFF, you can select Mute.
# When the hands-free telephoning is
Hands free ON, you can select
SRC off standby.

Selecting the display language

This unit allows you to select the display lan-

guage.

1 Press FUNCTION to select

Language select.

Press FUNCTION repeatedly until

Language select appears in the display.

2 Press c or d to select the language.

Each press of c or d selects languages in the

following order:

EnglishFrançaisItalianoEspañol

DeutschNederlands

Setting the clock

Use these instructions to set the clock.

1 Press FUNCTION to select Clock.

Press FUNCTION repeatedly until Clock ap-

pears in the display.

2 Press c or d to select the segment of

the clock display you wish to set.

Pressing c or d will select one segment of the

clock display:

HourMinute

As you select segments of the clock display

the segment selected will be highlighted.

Initial Settings

En

59

English

Section

10

Advertising