Pioneer DEH-P9600MP - Manual (Page 44)

! Auto TA and EQ (auto-time alignment and
auto-equalizing) on page 55
! Recalling equalizer curves on page 52
! Adjusting equalizer curves on page 53
! Adjusting 13-band graphic equalizer on page
53
Extra functions
These functions are helpful in adjusting the
sound to suit your system or your personal
preferences.
! Using BBE sound on page 54
! Adjusting loudness on page 54
! Using automatic sound levelizer on page 54
! Adjusting source levels on page 55
Introduction of audio
adjustments
1
1 Audio display
Shows the audio adjustments status.
1 Press OPEN to open the front panel.
2 Press AUDIO to display the first audio
function names.
Press AUDIO repeatedly to switch between
the following audio functions:
Balance (balance adjustment)POSITION
(position selector)TA.1 (time alignment set-
ting)TA.2 (time alignment adjusting)
LOUD (loudness)EQ1 (graphic equalizer)
EQ2 (13-band graphic equalizer)BBE
(BBE)ASL (automatic sound levelizer)SLA
(source level adjustment)
FAD/BAL (balance adjustment)POSITION
(position selector)TA.1 (time alignment set-
ting)TA.2 (time alignment adjusting)
LOUD (loudness)EQ1 (graphic equalizer)
EQ2 (13-band graphic equalizer)SW.1
(subwoofer on/off)SW.2 (subwoofer cut-off
frequency)SW.3 (subwoofer slope)BBE
(BBE)
Audio Adjustments
En
44
Section
09